NEED HELP WITH A
PLUMBING, HEATING
OR DRAIN PROBLEM?

Nearly 90 percent of Edmonton homes rely on municipal treatment to meet Health Canada’s drinking water guidelines, yet you may still notice chlorine taste or mineral buildup (EPCOR). Good news, you can boost your tap water’s purity with a reverse osmosis system. Whether you’re facing hard water stains in Oliver or planning a new kitchen near Whyte Avenue, this guide will help you navigate Edmonton water treatment services for reverse osmosis installation and replacement. For expert installation or filter swaps, check out reverse osmosis system installation & replacement services in Edmonton from Kingstree Plumbing.

Key idea: A well-sized reverse osmosis setup delivers cleaner water, protects appliances, and improves taste year-round.

Reverse Osmosis System Installation & Replacement Services in Edmonton includes water testing to plan effective Water Treatment Services.

Understand reverse osmosis

Reverse osmosis (RO) forces water through a semi-permeable membrane that blocks up to 98 percent of dissolved solids, bacteria, and viruses. A typical system includes:

• Pre-filters (sediment, carbon) to protect the membrane
• RO membrane (the core barrier)
• Post-filter (carbon) for taste and odor
• Storage tank and faucet

A 2022 Water Quality Association report found that RO can remove 95–99 percent of total dissolved solids (TDS). You’ll notice softer skin after showers, fewer scale deposits on taps, and coffee that tastes fresher.

How RO fits in Edmonton

Edmonton’s Rossdale and E.L. Smith plants treat raw river water with coagulation, flocculation, filtration, and disinfection to meet provincial standards (EPCOR E.L. Smith water treatment process). Even so, minerals (calcium, magnesium) and residual chlorine can leave spots and off-flavors. An under-counter RO unit adds a final barrier right at your sink, giving you bottled-water quality without hauling jugs.

Assess your water quality

Before you pick a system, you need to know what’s in your water.

1. Get a lab test or DIY kit

• Check hardness (ideal under 120 mg/L as CaCO₃)
• Measure chlorine, iron, pH

1. Map your daily usage

• Average Edmonton household uses 275 L per person per day (ENERGYRATES.CA)
• Factor in drinking, cooking, pets

1. Note seasonal concerns

• Freeze-thaw cycles can concentrate minerals in winter
• Spring runoff may raise turbidity

Armed with data, you can choose a membrane rated for your local TDS and tank size that matches your peak demand. For a general overview of municipal treatment in this region, see our page on Edmonton water systems.

Plan your installation

Proper siting and permits ensure smooth setup.

Choose a location

Pick a spot under the kitchen sink or in a cold-room:

• Near existing cold-water line and drain
• With 60 cm of cabinet width and height for tank clearance
• Above the frost line if in an unheated basement (to avoid freezing)

Work with certified pros

Alberta requires a Restricted Certificate of Competency “R” or Private Sewage Certificate “PS” for plumbing that ties into potable water lines (Government of Alberta — plumbing codes and standards). A qualified plumber will:

• Drill an appliance-grade faucet hole
• Install feed valve, drain saddle, and tank valve
• Test for leaks and proper flow

For a seamless experience, explore our Edmonton reverse osmosis installation service.

Reverse Osmosis System Installation & Replacement Services in Edmonton shown during filter connection work for reliable Water Treatment Services.

Account for flood risk

Spring thaw can flood low-lying basements near the river valley. If your home is prone to seepage, raise the tank on a block or install a leak detector to protect flooring and finishes.

Maintain your system

Routine upkeep keeps water quality high and extends membrane life.

• Sediment and carbon pre-filters: replace every 6–12 months
• RO membrane: replace every 2–3 years (depending on TDS levels)
• Post-filter: swap annually for peak taste
• Sanitize housing and tank: once per year

You may also notice a flow drop or taste change—those are signs filters are exhausted. If you need filter swaps or membrane replacements, learn about our reverse osmosis replacement Edmonton plans. You’ll find affordable options at affordable reverse osmosis Edmonton.

Compare installation options

Deciding between DIY and professional fitting comes down to budget, skill, and warranty.

A plumber brings certified expertise and ensures compliance with local codes. If you value convenience and coverage, professional installation is worth the investment.

Reverse Osmosis System Installation & Replacement Services in Edmonton delivers clean drinking water through professional Water Treatment Services.

Recap and next steps

1. Test your water for hardness, chlorine, and TDS
2. Choose an RO system sized for your usage and kitchen layout
3. Hire certified plumbing pros to install and permit the unit
4. Keep up with filter and membrane swaps every 6–36 months

Ready to upgrade your tap water and protect your kitchen fixtures year-round? Need reverse osmosis system installation & replacement services in Edmonton? Call now or Book Online. You’ll enjoy crisp, clear water in every glass.

More Edmonton Water & Reverse Osmosis Resources

• Benefits of Better Water Systems in Edmonton
• Ways to Save on Reverse Osmosis Systems
• What to Know About Edmonton Water Treatment
• Checklist for Replacing Your RO System
• Helpful Tips for Installing Reverse Osmosis

FAQs

1. How long does RO installation take? A standard under-sink system usually takes 2–4 hours, including testing and cleanup.

2. Will RO waste a lot of water?
Modern units use 1–3 L of reject water per 1 L of purified water, often paired with greywater reuse for gardens.

3. Can I install an RO system outdoors?
It’s not recommended unless housed in an insulated, heated cabinet to prevent freezing.

4. Is RO safe for infants?
Yes, but you may need to remineralize the water (small calcium and magnesium drops) for baby formula.

5. Do RO systems remove fluoride?
Most membranes filter out fluoride. If you want fluoride left in your water, consider a dedicated